click to enlarge
Click to download Pdf
   
   
   
   
 
   
   
   
   
 
Hydraulic Vise
• Prevents material movement while sawing
• Easy set-up
• Positive clamping on full range of capacity
Graduated Length Stop
• Combines with fine feed roller for accurate material indexing
• Quick and easy set-up
Dual Cut Control System
• Combines with fine feed roller for accurate material indexing
• Quick and easy set-up
• Blade feed controlled by both pressure and flow
• Maximum blade life in all cutting applications
• Easy set-up with reference cutting rate system
Semi Automatic Indexing
• Quick and easy indexing with fine feed roller
 
 
  Cutting capacity
Round work (Diameter)
:
 250 mm {9.8 in.}
Rectangular work (H X W)
:
 250 x 300 mm {9.8 x 11.8 in.}
   Motors
Saw blade
:
 2.2 kW {3HP}, 4P
Hydraulic pump
:
 0.75 kW {1HP}, 4P
Cutting fluid pump
:
 0.12 kW {0.16HP}, 2P
   Control circuit voltage
:
 AC 100 V
  Saw blade
Dimensions (W x T x L)
:
 25 x 0.95 x 3505 mm {1 x 0.037 x 138 in.}
Speed
:
 27, 40, 54, 68, 80 m/min {89, 131, 177,223,262 ft/min}
Tension
:
 Manually-operated spring
   Vise
Type
:
 Single vise
Control
:
 Hydraulic (Manual open/close lever)
  Cutting fluid
Tank capacity
:
 38 liters {10 US gal}
Pump type
:
 Centrifugal
  Hydraulic oil
Tank capacity
:
 20 liters {5.3 US gal}
Pump type
:
 Variable discharge vane
Set pressure
:
 2 MPa {20 kgf/cm2 or 285 psi}
  Blade control
Raised position setting
:
 Manual setting dial
Cutting control
:
 Oil pressure - flow control valve
  Chip disposal
:
 By hand shoveling
  Table height (above floor)
:
 700 mm {27.6 in.}
   Maximum allowable work load
:
 1500 kg {3307 lb}
   Machine dimensions(W x D x H)
:
 1868 x 1845 x 1772 mm {73.6 x 72.6 x 69.8 in.}
   Machine mass
:
 1000 kg {2205 lb}
   
Graduated length stop
Roller stand
Roller table
 
  Note: Specifications may change without notice at the sole discretion of Amada's Engineering Department
 
Copyright © 2011 Tru-Cut Tools (I) Pvt. Ltd.