The SGLB was designed to cover a broad range of cutting applications and to provide maximum efficiency in sawing wear-resistant tool steels. The blade's tough M-42 cobalt edge resists heat and abrasion, while the varied pitch tooth form expands the ranges of sizes and shapes that can be sawed successfully without changing blades.
   
   
   
   
   
 
 
   
   
       
 
    M-42 cobalt high speed steel edge
    Hardness of HRC 68-69
    Specially designed tooth form
    7 degree positive rake angle
       
 
    High heat resistance
    High wear resistance
    Better tooth penetration
       
 
    Long life on moderate to difficult to cut materials
    Fast cutting rates
    Low cost per cut
    High production rate
       
 
=Break-in area/ 1000 cm2
 
 
Structural
Steel
Bundled
small
diameter
material
Mild steel,
Non-ferrous
metal
Tool steel,
Prehardened
steel
Hot work die
steel,
Stainless steel
Super heat
resisting alloy
Small
~
100mm
Medium
100 ~
400mm
Large
400mm
~
Small
~
100mm
Medium
100 ~
400mm
Large
400mm
~
Small
~
100mm
Medium
100 ~
400mm
Large
400mm
~
Small
~
100mm
Medium
100 ~
400mm
Large
400mm
~
 
 • A36  • 50, 55, A, B, C, D,  • 1012, 1008
 • 30, 33, 40, 45, 50, 55  • A569
 • 1005-1095, 1513-1536 • 1541-1572,
 • 5015 - 5150  • 4118 - 4161  • 1330 - 1345
 • 3115 - 3315  • 4012 - 4047, 4419, 4422, 4427
 • 4615 - 4626, 4815 - 4820
 • 4320 - 4720, 8115 - 9430
 • 1108 - 1215  • 1100 - 7075
 • C10200, C12000, C21000 		 • W-1, W-2, W-5
 • P-2, P-3, P-4, P-5, P-6,    P-20, P-21
 • S-1, S-2, S-4, S-5, S-6,    S-7
 • L-2, L-6,  • 5155, 5160
 • A-2, O-1, O-2, O-6,
   D-2, D-3, CPM 10V
 • T-1, T-2, T-3, T-4,
   M-1, M-2, M-5, M-15
 • 50100, 51100, 52100 		• H-10, H-13, H-21, H-22,
  H-24, H-25
 • 210, 202, 302, 303,   304, 308
 • 314, 316, 317, 321,   330, 347
 • 410, 416, 420, 430,   440C
 • 15-5PH, 17-4PH, 15-7
 • 309, 409, 600
 • MONEL, K-MONEL,
   INCONEL718,
   HASTELLOY A, B, C,
 • A286, INCOLOY 800,    RA330
 • ASTROLOGY WF-11
 • Monel400, K-500
 • Ti-6AI-4v
 
Band width
(mm)
Band thickness
(mm)
Pitch
0.75 / 1
1.1 / 1.5
1.5 / 2
2 / 3
2 / 3 WS
3 / 4
3 / 4 WS
4 / 6
5 / 7
6 / 10
8 / 12
19
0.9
          
•
  
•
•
    
27
0.9
      
•
  
•
  
•
•
•
•
34
1.1
  
•
  
•
  
•
  
•
•
•
•
41
1.3
  
•
•
•
°
•
°
•
•
    
54
1.6
•
•
•
•
°
•
°
•
      
67
1.6
•
•
•
•
°
•
°
•
      
80
1.6
•
•
•
•
      
•
      
° : The WS (Wide Set) type blade is a special saw blade with a measure against pinching which occurs easily when cutting the roll
  formed size H-beam (applicable to H-beam whose width is over 400mm and mainly intended for that of 600mm or more width).
Note) Using of the WS type blade for cutting the material where no pinching would occur may shorten the service life of the blade.
 
Copyright © 2011 Tru-Cut Tools (I) Pvt. Ltd.