The MGLB is best suited for cutting structural shapes, tubing and stacks of mild steel pieces. The MGLB allows band saw machines to cut a wide range of material sizes and shapes without requiring a change of blades. Its tough high-speed steel teeth resist chipping, stripping and abrasion. It can also tolerate the occasional improper speeds and feeds that are often used by inexperienced saw operators
 
   
   
       
 
    Matrix cobalt high speed steel edge
    Hardness of HRC67-68
    Specially designed tooth form
       
 
    Tough shock resistant tooth edge
    High wear resistance
       
 
   

Long life on mild solid steel and heavy wall tubing & structural
    Low cost per cut
    High production rate
       
   
   
   
   
   
 
 
 
=Break-in area/ 1000 cm2
 
 
Roll formed section
Structural steel
Bundled small
diameter material
Mild steel, Non - ferrous metal
Small
~100mm
Medium
100
~400mm
Large
400mm~
 
 • A36
 • 50, 55, A, B, C, D,
 • 1012, 1008
 • 30, 33, 40, 45
 • A569 		 • 50, 55, A, B, C, D,
 • 1005-1095, 1513-1536
 • 1541-1572  • 5015-5150
 • 4118-4161  • 1330-1345
 • 4012-4047, 4419, 4427
 • 3115-3315
 • 4615-4626, 4815-4820
 • 4320-4720, 8815-9430
 • 1108-1215  • 1100-7075
 • C10200,C12000,C21000
 

Band width
(mm)
Band thickness
(mm)
Pitch
2 / 3
2 / 3 WS
3 / 4
3 / 4 WS
4 / 6
5 / 7
6 / 10
8 / 12
10 / 14
19
0.9
    
•
  
•
•
•
•
•
27
0.9
    
•
  
•
•
•
•
•
34
1.1
•
  
•
  
•
•
•
•
  
41
1.3
•
°
•
°
•
•
      
54
1.3
    
•
°
          
1.6
•
°
•
°
•
        
67
1.6
  
°
•
°
          
°: The WS (Wide Set) type blade is a special saw blade with a measure against pinching which occurs easily when cutting the roll  formed size H-beam (applicable to H-beam whose width is over 400mm and mainly intended for that of 600mm or more width). Note) Using of the WS type blade for cutting the material where no pinching would occur may shorten the service life of the blade.
 
Copyright © 2011 Tru-Cut Tools (I) Pvt. Ltd.