click to enlarge
Click to download Pdf
   
 
   
   
   
 
   
 
  Cutting capacity
Round work (diameter)
:
Ø30 to Ø530 mm {Ø1.18 to Ø20.87 in.}
  Rectangular work (H X W)
:
30 x 30 mm to 530 x 530 mm {1.18 x 1.18 in. to 20.87 x 20.87 in.)
  Motors
Saw blade motor
:
7.5 kW {10.0 HP}, 4P
Hydraulic pump motor
:
3.7 kW {5.0 HP}, 4P
Cutting fluid pump motor
:
0.18 kW {0.24 HP}, 2P
Wire brush motor
:
0.09 kW {0.12 HP}, 4P
  Environment
Power source
:
3-phase, 200 VAC :± 10%, 50/60 Hz
3-phase, 220 VAC :± 10%, 60 Hz
Temperature
:
Operating: 0 to 40°C (32 to 104°F)
Nonoperating: -5 to 50°C {23 to 122°F}
Humidity
:
Operating: 30 to 90%
Nonoperating: 10 to 95% (noncondensing)
   Control circuit voltage
:
AC 100 V, DC 24 V
  Saw blade
  Dimensions (W x T x L)
:
67 x 1.6x 6670mm {2.64 x 0.063 x 262.6 in.}
Running speed
:
15 to 120 m/min {49 to 394 fpm} at 50/60 Hz, changed by inverter
Tension control
:
Hydraulic powered, with saw blade breakage and slip detection functions
Guide
Side
:
Inserts, bearing twist
Back
:
Backup tips
  Vise
Type
:
Split vise
Operation
:
Hydraulic full-stroke cylinder
  Cutting fluid
  Tank capacity
:
200 liters {52.8 US gal}
Pump type
:
Centrifugal pump
Pump capacity
:
60 liters/min {15.9 US gal/min} at 50/60 Hz
  Hydraulic
Tank capacity
:
40 liters {10.6 US gal}
Pump type
:
Piston pump
Pump capacity
:
22 liters/min {5.8 US gal/min} at 50 Hz
26 liters/min {6.9 US gal/min} at 60 Hz
Pressure setting
:
7.0 MPa {70 kgf/cm2 or 996 psi}
   Saw blade control
Up
Automatic
:
Hydraulic automatic rise (automatic stop at upper limit)
Manual
:
Inching up by pushbutton operation
Rise height setting
:
Automatic setting with quick approach feeler
Down
Automatic
:
Rapid approach with quick approach feeler
Manual
:
Inching down by pushbutton operation
Depth-of-cut control
:
Hydraulic powered, CNC-LlGHT unit
Slip detection
:
Automatic stop at overload, jamming, or breakage
   Work feed
Type (capacity)
:
Hydraulic shuttle type, maximumstroke length of 400 mm(15.75 in.), standby position selectable
Remnant lenght
:
85 mm {3.35 in.} for clamp clearance of 10 mm {0.4 in.}
  Chip disposal
:
Automatic follow-up wire brush
Chip conveyor (automatic hydraulic screw type)
  Table height
:
830 mm {32.7 in.}
  Allowable loading mass on machine
:
4000 kg {8820 Ib}
  Machine dimensions (W x D x H}
:
3015 x 1865x 1965 mm {118.7 x 73.4 x 77.4 in.}
   Machine mass
:
Approx. 6300 kg {13890 lb}
   Number of Input Stations
:
99
   Cutoff length
:
10.0 to 9999.9 mm in 0.1-mm increments
0.394 to 99.999 inches in 0.001-inch increments
   Number of cut pieces
:
1 to 9999 per station
   Kerf compensation
:
Automatic kerf compensation
Also automatically calculated during feed of long work
   Input method
:
Numeric-key input
   Cutting data display
:
LCD screen
   Memory backup
:
Yes (dedicated battery built in)
Note: Specifications may change without notice at the sole discretion of Amada's Engineering Department
 
Copyright © 2011 Tru-Cut Tools (I) Pvt. Ltd.